SCADA system automatic message triggering in manufacturing plantExtremely Reliable

Paging system with SCADA triggering playout of pre-recorded messages to multiple zones. 8 zones paging system and has a requirement to play 6 pre-recorded messages to multiple zones, triggered by a SCADA system.

Simple update of messages by exchanging USB stick.
Exstreamer 200/P5 can feed loudspeakers directly not needing an amplifier.
Except to Barionet 50, completely PoE solution, making cabling simple (no power required) and adding flexibility to power cycling the devices remotely.
Zones expandability using PS16 extension keys.


Solution: IC Paging firmware on PS16, Exstreamer P5, Exstreamer 200, and Exstreamer 100. Digital Message Repeater and IP Intercom on Annuncicom 200. Tailored firmware on Barionet 50.

Barix proposed IC Paging solution with Exstreamer P5, Exstreamer 200, Exstreamer 100. A couple of Annuncicom 200 acts as player/encoder. Barionet 50, with tailored firmware, works as gateway between SCADA system and Annuncicoms. Barionet 50 sends UDP commands to the encoder (destination IP/port) and to the player (start/stop messages playing). The encoder Annuncicom sends the stream to the notification port of IC Paging Client firmware.

Structure of the Setup

Why Barix

Reliable and Solid

We create products that last. Buy it once and it runs. Certified and tested in real-life to run 10+ years. 

Specialized Support

The Barix support team contains of audio experts. We help you individually for each specific architecture. 

Up to date

Check the downloads for the latest firmware updates. Barix products are compatible with your system. 

Customizable

Barix Products can be customized to special requirements. Either by yourself or from our professional audio development team.


More information on the products

Feel free to write us a message with your requirements. Our Pre-Sales teams can help you find a simple and cost-effective solution.

 

Contact

Annuncicom PS16

  • G.711, G.722, PCM Encoding
  • MP3 Encoding
  • AACplus, MP3, Ogg Vorbis, G.711, G.722, PCM Decoding
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Power Supply (PoE & Adapter)
  • Supply Voltage (24V)
  • Target/Function Buttons (16) + Key Extension (48)
  • USB Flash Memory Interface (256MB)

 

Technical Details

Exstreamer 200

  • G.711, uLaw, aLaw, PCM Encoding
  • AACplus, MP3, Ogg Vorbis, G.711, PCM linear Decoding
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Amplified Output 2x25W (8 Ohm)
  • RS-232 Serial Port
  • Power Supply (24V, included)
  • MicroSD or USB Flash Interface
  • IR Interface

 

Technical Details

Annuncicom 200

  • MP3, G.711, G.722*, PCM Encoding
  • MP3, G.711, G.722*, PCM Decoding
  • Shoutcast/Icecast Source capability
  • Audio Level Supervision with SNMP Trap generation
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Microphone Input
  • Line Level Input
  • Line Level Output
  • Amplified Output 8W (8 Ohm)
  • Relay Output (1)
  • Contact Closure Input (2)
  • RS-232 Serial Port (1)
  • RS-485 Serial Port (1)
  • Isolated Power Supply Input (PoE or ext)
  • Supply Voltage (16..30VDC or 48VDC)
  • Aiphone Door Station Interface (IE/JE series)

 

Technical details

Exstreamer P5

  • AACplus, MP3, Ogg Vorbis, G.711, PCM Decoding
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Amplified Output 5W (8 Ohm)
  • RS-485 Serial Port
  • Powered over Ethernet (PoE)

 

Technical Details

Exstreamer 100

  • AACplus, MP3, Ogg Vorbis, G.711, PCM linear Decoding
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Line Level Output (Stereo)
  • Relay Output (Ex110 & Ex120 only)
  • RS-232 Serial Port
  • Power Supply (9-30 VDC, 12-24 VAC, plug included)
  • IR receiver and Display built-in (Ex110 & Ex120 only)
  • MicroSD or USB Flash Interface

 

Technical Details

Barionet 50

  • Relay Output (4x24V, 0.5A)
  • Contact Closure Input (4)
  • RS-232 Serial Port (1)
  • RS-485 Serial Port (1)
  • Supply Voltage (9-30V)

 

Technical Details


Create your own SCADA system automatic message triggering in manufacturing plant?

Leave us your email address if you would like to get contacted. 

By sending this form you agree to our Terms of Service and Privacy Policy.