Instreamer

Encoding Audio over IP - simply anywhere, anytime

The Instreamer makes the streaming of audio over IP networks smooth and easy. It encodes any incoming audio signal into G.711, PCM or high-quality MP3 streams and can send the stream to up to 32 different destinations across the LAN or over the internet. Instreamers support unicast, broadcast or multicast streaming along with peer-to-peer connections with other Barix devices. It can also be used for integration into wide audio infrastructures with Shoutcast, Icecast or an other third party software. Simple web and command interfaces make the firmware configurable and the audio stream can be adjusted to the network bandwidth. The stream can be started/stoped in several ways (send on CTS, send on level or send always). The serial port is usable as command port or for serial network tunneling. Together with a Barix encoder device (e.g. Instreamer, Annuncicom or Exstreamer500), the firmware is an easy-to-install and cost-effective solution for professional audio streaming and can even be used for MOH solutions.

Main Features

Support as codec: MP3 (VBR/CBR), PCM and G.711
Supported stream connections: HTTP, RTP, SIP, Raw UDP, Raw TCP, Icecast and Icecast ID3 source, Shoutcast source
Supports Serial Port relaying (Serial gateway over Network)
Supports all General Purpose Inputs (GPIs) on the Exstreamer 1000, Exstreamer 500 and Annuncicom 1000. The Inputs are used either to trigger streaming or to send contact closures to a partner device with SW loaded capable of decoding the information
Streaming can be set to "send always", "send on CTS", "send on Level", or manually via web interface
The device can serve up to 6 concurrent HTTP radio streams or 8 UDP/RTP streams
Up to 32 BRTP streams at 128kbit/s are supported
Supports SNMP protocol for monitoring device
LiveFeed Service for Cisco’s Call Manager is supported with xml files