Technical Specifications
Electrical
802.3af PoE on RJ-45 connector
48 VDC nomimal, 12 Watt max.
Ethernet
10/100Mbps auto rate, full/half duplex
RJ-45 connector with integrated Link/Activity LED
802.3af PoE support
Protocols: TCP/IP, UDP, RTP, DHCP, Multicast capable
Audio Input
Characteristics/mode selectable by software:
"Mic" mode:
- 2.9 VDC, bias power for electret microphone supplied
"Line" mode:
- 2kΩ input impedance
- 3.9 VPP max, adjustable in sensitivity
- Frequency response 25 Hz .. 19 kHz (-3dB)*
- Dynamic range 85 dB, SNR -85 dB, THD <0.1% (-3 dBFS)*
Mechanical
Aluminum case, 280g
Dimensions 108 x 38 x 78.7 mm (4.25 x 1.5 x 3.1" inch)
rack and wall mountable using optional accessories
MTBF
min. 500 000h (according to MIL217F at 25°C)
* depends on used codec, best results @48kHz PCM
Analog Line Output (mono)
Transformer isolated, balanced (600 Ω)
Output level software controllable
Full scale output voltage: 5.2 dBu, 4.0 VPP
Frequency response 35 Hz .. 17 kHz (-3dB)*
Dynamic range 85 dB, SNR -85 dB, THD <0.5% (-3dBFS)*
Speaker out
Suggested speaker impedance 8Ω (min.)
5 Watt max output power @ 8Ω
Values @ 8Ω:
Frequency response 25 Hz .. 16 kHz (-3dB)*
Dynamic range 87 dB, SNR 87 dB, THD <1% (-3dBFS)*
RS-232 Interface
On 9-pin Sub-D connector, male
5-wire (Tx,Rx,RTS,CTS)
300..230'400 Baud asynchronous, tunneling or local control
Supported Audio formats
PCM, G.711, G.722, MP3 encode/decode
AAC+ decode
PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
Discrete I/O (Contact Closure Input)
1 discrete / dry contact input
Accessories
Contact us about the Annuncicom 60
We can help you build the ideal solution. Send us a quick message and we will return your inquiry as soon as possible.
Contact us for more information
sales@barix.com
Ordering Packages
Packages
2012.9120
Annuncicom 60
2006.9072
Wall mount bracket
2007.9082 19’’
Rack mount shelf (for up to 4 devices)